
30 lb Cement Kettlebell Mold For A Steel Pipe Handle Functional Parametric 3D Print STL File
A 30 lb kettlebell, 244 mm across and 163 mm tall. Handle: 3/4 in black pipe, bought, with a 5 in grip, two elbows, two 7 in leg nipples; the 30 lb counts the whole handle. Tape the legs' ends; drill and bolt across each leg near its end, bolts pointing along the grip. Hang the handle from a stick across the rim, elbows' centres 70 mm above it, for a hand gap. Use sand/topping mix, not gravel mix: about 27 lb, a third of an 80 lb bag. Cure a week before use. Printer: 163 × 244 mm. Use only the water the bag asks for. Never drop it.































































