
100 mm Cement Step Block Mold One Piece Step Up Block Prop Realistic 3D Print STL File
A 100 mm step block for step-ups, never for jumping: 244 mm front to back, 242 mm wide. Each block is for one foot, so make two and set them side by side. Stand the printed mold as drawn and fill with sand/topping mix, never gravel mix: about 25 lb, three tenths of an 80 lb bag. Screed level with the rim, then cure a week before use. Printer: 242 mm tall, bed at least 244 by 103 mm. Use only the water the bag asks for. Never drop it.































































